ALI Certified Commercial Grade Overhead 10,000 lb. Capacity
The ALI CERTIFIED Atlas Platinum PVL10 was engineered and built to offer a commercial grade above ground lift to those customers who have “fallen in love” with the reliability offered by the Double S column design and symmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.
The Atlas Platinum PVL10 can be installed with the columns positioned symmetrically or asymmetrically. When the columns are installed in the asymmetrical configuration, there may be some benefit to open car doors. When the columns are installed in the symmetric configuration there is more width between the columns. Please check the specifications page and picture gallery to determine which height setting and column configuration (asymmetrical or symmetrical) would be the best for your application. Both column configurations offer easy vehicle access and superior vehicle lift point support due to the three stage front arm design.
The Atlas Platinum PVL10 features three (3) stage telescoping front arms, double screw rubber/metal adapters with truck height extensions, protective rubber pads mounted to the carriage ,rubber column guards, and a price that cannot be matched.
A couple of installers put up the PVL10 in about 3 hours. Click here to view a timelapse video of it in action.
- 10,000 lb. Capacity
- Column design incorporates special Double S bends to increase column strength.
- Padded Carriages
- Columns can be installed Asymmetrically OR Symmetrically
- Higher quality powder coating
- Single point lock release
- Double screw-up adapter kit included
- Truck adapter set included
- 3 stage front arms and 2 stage rear arms offer more options
| Atlas® Platinum Specifications | ||
| Setup | High | Low* |
| Capacity | 10,000 LB. | 10,000 LB. |
| Lifting Time | Ask Your Salesperson | Ask Your Salesperson |
| Front Arm Length | (43 1/2" Max); (22" Min); (31 1/4" Mid) | |
| Rear Arm Length | (58" Max); (35" Min) | |
| Overall Height With Cylinder | 148" (12' 4") | 148" (12' 4")* |
| Overall Height | 139 7/8" (11' 7 7/8") | 135 7/8" (11' 3 7/8")* |
| Overall Width | 139" (11' 7") (Asymmetrical) 135 1/4" (11' 3 1/4") (Symmetrical) |
|
| Outside Column to Outside Column | 130" (10' 10") (Asymmetrical) 127 1/2" (10' 7") (Symmetrical) |
|
| Maximum Lift Height (With Adapters) | 81 1/2" (6' 9 1/2") (highest pad setting) 79 1/4" (6' 7 1/4") (lowest pad setting) |
81 1/2" (6' 9 1/2") (highest pad setting) 79 1/4" (6' 7 1/4") (lowest pad setting) |
| Maximum Lift Height (Without Adapters) |
70" (5' 10") (lowest pad setting), 72 1/2" (6' 1/2") (highest pad setting) |
70" (5' 10") (lowest pad setting), 72 1/2" (6' 1/2") (highest pad setting) |
| Pad Height | 4" | |
| Adapter Heights | 3" & 6" | |
| Minimum Arm Height | 4 1/2" | |
| Between Columns | 107 3/4" (8' 11 3/4") (Asymmetrical) 112 1/2" (9' 4 1/2") (Symmetrical) |
|
| Column Size | 10 1/4" x 7" | |
| Drive Through | 91" (7' 7") (Asymmetrical) 99 1/2" (8' 3 1/2") (Symmetrical) |
|
| Base of Lift | 18" x 15" | |
| Shut-Off Height | 134 1/4" (11' 2 1/4") | 130 1/4" (10' 10 1/4")* |
| Cable | .315" (8mm) | |
| Column Thickness of Steel | 6mm / double S column design increases column strength | |
| Carriage Thickness of Steel | Frame: 8mm Yoke: 16mm |
|
| Arms Thickness of Steel | Frame: 6mm Telescopic Arm: 8mm |
|
| Shipping Weight | 1,850 Lbs. | |
| Requires a minimum of 4" of concrete with 3000 psi. All lifts come with a step by step instruction manual. *Requires the purchase of additional shorter cables. *Overall height with cylinder remains the same. |
||
| Atlas® Atlas Platinum PVL10 Manual | Download |
| Weight | 1850 lbs |
|---|---|
| Brand |
