The Atlas Elite 10X two post above ground lift with Super-Symmetric arms is the perfect choice for those commercial garages, tire dealers, or car dealers that need a lift with ALI/ETL third party certification.
Atlas Elite 10X Specifications | ||
Setup | High | Low |
Capacity | 10,000 LB. | |
Lifting Time | Ask Your Salesperson | |
Overall Height | 148 3/4″ (12′ 4 3/4″) | 143 3/4″ (11′ 11 3/4″) |
Padded Bar Height | 144 1/8″ (12′ 1/8″) | 139 1/8″ (11′ 7 1/8″) |
Overall Width | 138″ (11’6″) (Asymmetrical) 136 1/2″ (11′ 4 1/2″) (Symmetrical) | |
Outside Column to Outside Column | 130″ (10′ 10″) (Asymmetrical) 127 1/2″ (10′ 7″) (Symmetrical) | |
Maximum Lift Height (Without Adapters) | N/A | |
Maximum Lift Height (With Adapters) | 76 1/2″ (6′ 4 1/2″) | 71 1/2″ (5′ 11 1/2″) |
Minimum Arm Height | 4 “ | |
Inside Column | 102″ (8′ 6″) (Asymmetrical) 109 3/4″ (9′ 1 3/4″) (Symmetrical) | |
Column Size | 11 1/2″ x 7 1/2″ | |
Column Thickness of Steel | 6mm | |
Drive Thru | 92″ (7′ 8″) (Asymmetrical) 98 3/4″ (8′ 2 3/4″) (Symmetrical) | |
Base Of Lift | 23″ x 16″ | |
Cable Diameter | .315″ (8mm) | |
Motor/Electrical Requirement | 2 HP 220Volt/60hz./Single (1) Phase. A 30 amp breaker is recommended. | |
Shipping Weight | 1,800 LBS. | |
Requires a minimum of 4″ of concrete with 3000 psi. All lifts come with a step by step instruction manual. |