No products in the cart.
- 10,000 lb. capacity
- Direct Drive Cylinders
- Inside Column Width: 111 1/2″ (9' 3 1/2″)
- Heavy Duty Super-Symmetric 3 Stage Front, 2 Stage Back Arms
- Symmetric Columns
- Overhead Design
- Automatic Arm Restraints
- Atlas® Powder Coat Finish
- Single Point Lock Release
- Free 12 Piece Truck Adapter Set
- Mounting Hardware Included
- 5 Year Structural Warranty, 2 Year Hydraulic Cylinder Warranty, and 1 Year Power Unit Warranty
Add to My List
Add to My List
The Atlas 10OHSC two post commercial grade above ground lift is the perfect choice for large commercial repair facilities or individual users who demand the highest quality at the absolute best price. The 10OHSC is a TRUE 10,000 lb. capacity two post lift and was engineered and manufactured to lift vehicles ranging from Smart Cars to full-size pickups. Extra lifting height and super-symmetric arm configuration allows the operator to work on all sizes of vehicles. If you are over 6′ 2″, the Atlas 10OHSC has longer cylinders which allow the vehicle to be lifted about 3 inches higher than many other lifts.
The Atlas 10OHSC incorporates a single piece 12′ 7″ formed column and an extra long carriage that provides maximum column and arm strength to lift and support a 10,000 lb. vehicle. The single piece columns require the customer to have a ceiling of at least 13 feet to stand the column.
A solid column coupled with the longer carriage offers unparalleled structural support for all types of lifting requirements.
| Atlas 10OHSC Specifications | ||
| Capacity | 10,000 LB. | |
| Lifting Time | Ask Your Salesperson | |
| Overall Height | 151 1/2″ (12′ 7 1/2″) | |
| Padded Bar Height | 144″ (12′) | |
| Overall Width | 137 3/8″ (11′ 5 3/8″) | |
| Outside Column to Outside Column | 129 7/8″ (10′ 9 7/8″) | |
| Maximum Lift Height (With Adapters) | 84″ (7′) | |
| Minimum Arm Height | 4″ | |
| Inside Column | 111 1/2″ (9′ 3 1/2″) | |
| Column Size | 11″ x 9 1/8″ | |
| Column Thickness of Steel | 5mm | |
| Carriage Thickness of Steel | 5mm | |
| Arms Thickness of Steel | 6mm | |
| Drive Thru | 100 1/8″ (8′ 4 1/8″) | |
| Base Of Lift | 18 1/2″ x 21 1/2″ | |
| Cable Diamter | .375″ | |
| Motor/Electrical Requirement | 3HP, 220 volt single (1) phase A 30 amp breaker is recommended | |
| Oil Requirement | 3-5 Gallons AW32/AW46 | |
| Shipping Weight | 1,665 LBS. | |
| Requires a minimum of 4″ of concrete with 3000 psi. All lifts come with a step by step instruction manual. | ||
| Documents | Size: | Pages: | |
|---|---|---|---|
| Atlas 10OHSC Manual | 2.3 MB | 40 |  View |
| Brand |
|---|
