Apex-10H ALI Certified Extra Tall 10,000 LB. Capacity 2-Post Lift

Call for Price

  • Extra overall height: 164″ (13' 8″)
  • 10,000 lb. Capacity
  • Column design incorporates special Double S bends to increase column strength.
  • Padded Carriages
  • Columns can be installed Asymmetrically OR Symmetrically
  • Professional grade arm lock restraint system
  • Higher quality powder coating
  • Single point lock release
  • Double screw-up adapter kit included
  • Truck adapter set included
  • 3 stage front arms and 2 stage rear arms offer more options

How to Purchase

Product Description

The ALI CERTIFIED Atlas® Apex-10H is the taller version of the Atlas® Apex 10 . The overhead beam (that connects the two columns) is positioned two feet higher than the overhead beam on the Atlas® Apex 10. The taller position of the overhead beam allows the Atlas® Apex-10H above ground hoist to lift “taller vehicles” such as “ladder rack trucks” and cargo vans.

Atlas® Apex-10H Specifications
Setup High Low (requires spacers)*
Capacity 10,000 LB. 10,000 LB.
Lifting Time Ask Your Salesperson Ask Your Salesperson
Front Arm Length (43 1/2″ – Max); (31 1/4″ – Mid);
(22″ – Min)
Rear Arm Length (58″ – Max); (35″ – Min)
Overall Height 164″ (13′ 8″) 160″ (13′ 4″)*
Overall Width 139″ (11′ 7″) (Asymmetrical)
135 1/4″ (11′ 3 1/4″) (Symmetrical)
Outside Column to Outside Column 130″ (10′ 10″) (Asymmetrical)
127 1/2″ (10′ 7″) (Symmetrical)
Maximum Lift Height (With Adapters) 81 1/2″ (6′ 9 1/2″)
(highest pad setting)
79 1/4″ (6′ 7 1/4″)
(lowest pad setting)
81 1/2″ (6′ 9 1/2″)
(highest pad setting)
79 1/4″ (6′ 7 1/4″)
(lowest pad setting)
Maximum Lift Height
(Without Adapters)
70″ (5′ 10″) (lowest pad setting),
72 1/2″ (6′ 1/2″) (highest pad setting)
70″ (5′ 10″) (lowest pad setting),
72 1/2″ (6′ 1/2″) (highest pad setting)
Pad Height 4″
Adapter Heights 3″ & 6″
Minimum Arm Height 4 1/2″
Between Columns 107 3/4″ (8′ 11 3/4″) (Asymmetrical)
112 1/2″ (9′ 4 1/2″) (Symmetrical)
Column Size 10 1/4″ x 7″
Drive Through 91″ (7′ 7″) (Asymmetrical)
99 1/2″ (8′ 3″1/2″) (Symmetrical)
Base of Lift 18″ x 15″
Shut-Off Height 158″ (13′ 2″) 154″ (12′ 10″)*
Cable .315″ (8mm)
Column Thickness of Steel 6mm / double S column design increases column strength
Carriage Thickness of Steel Frame: 8mm
Yoke: 16mm
Arms Thickness of Steel Frame: 6mm
Telescopic Arm: 8mm
Shipping Weight 1,850 Lbs.
 
Requires a minimum of 4″ of concrete with 3000 psi.
All lifts come with a step by step instruction manual.
*See manual for installing spacers for lower height.
*Overall height with cylinder remains the same.

Documents Size: Pages:  
Atlas® Apex-10 Manual 1 MB 46 downloadView
Atlas® Apex-10 Parts List 539 KB 19 downloadView

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.