Apex-10 ALI Certified 10,000 LB. Capacity 2-Post Lift

Call for Price

  • 10,000 lb. Capacity
  • Column design incorporates special Double S bends to increase column strength.
  • Padded Carriages
  • Columns can be installed Asymmetrically OR Symmetrically
  • Professional grade arm lock restraint system
  • Higher quality powder coating
  • Single point lock release
  • Double screw-up adapter kit included
  • Truck adapter set included
  • 3 stage front arms and 2 stage rear arms offer more options

How to Purchase

Description

The ALI CERTIFIED Atlas« APEX 10 was engineered and built to offer a commercial grade above ground lift to those customers who have fallen in love with the Double S column design and asymmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.

The Atlas« APEX 10 features three (3) stage telescoping front arms, double screw rubber / metal adapters with truck height extensions, protective rubber pads mounted to the carriage, rubber column guards, and a price that cannot be matched.

Atlas« Apex-10 Specifications
Setup High Low (requires spacers)*
Capacity 10,000 LB. 10,000 LB.
Lifting Time Ask Your Salesperson Ask Your Salesperson
Front Arm Length (43 1/2″ – Max); (22″ – Min); (31 1/4″ – Mid)
Rear Arm Length (58″ – Max); (35″ – Min)
Overall Height With Cylinder 142 1/2″ (11′ 10 1/2″) 142 1/2″ (11′ 10 1/2″)*
Overall Height 139 7/8″ (11′ 7 7/8″) 135 7/8″ (11′ 3 7/8″)*
Overall Width 139″ (11′ 7″) (Asymmetrical)
135 1/4″ (11′ 3 1/4″) (Symmetrical)
Outside Column to Outside Column 130″ (10′ 10″) (Asymmetrical)
127 1/2″ (10′ 7″) (Symmetrical)
Maximum Lift Height (With Adapters) 81 1/2″ (6′ 9 1/2″) (highest pad setting)
79 1/4″ (6′ 7 1/4″) (lowest pad setting)
81 1/2″ (6′ 9 1/2″) (highest pad setting)
79 1/4″ (6′ 7 1/4″) (lowest pad setting)
Maximum Lift Height
(Without Adapters)
70″ (5′ 10″) (lowest pad setting),
72 1/2″ (6′ 1/2″) (highest pad setting)
70″ (5′ 10″) (lowest pad setting),
72 1/2″ (6′ 1/2″) (highest pad setting)
Pad Height 4″
Adapter Heights 3″ & 6″
Minimum Arm Height 4 1/2″
Between Columns 107 3/4″ (8′ 11 3/4″) (Asymmetrical)
112 1/2″ (9′ 4 1/2″) (Symmetrical)
Column Size 10 1/4″ x 7″
Drive Through 91″ (7′ 7″) (Asymmetrical)
99 1/2″ (8′ 3 1/2″) (Symmetrical)
Base of Lift 18″ x 15″
Shut-Off Height 134 1/4″ (11′ 2 1/4″) 130 1/4″ (10′ 10 1/4″)*
Cable .315″ (8mm)
Column Thickness of Steel 6mm / double S column design increases column strength
Carriage Thickness of Steel Frame: 8mm
Yoke: 16mm
Arms Thickness of Steel Frame: 6mm
Telescopic Arm: 8mm
Shipping Weight 1,750 Lbs.
 
Requires a minimum of 4″ of concrete with 3000 psi.
All lifts come with a step by step instruction manual.
*See manual for installing spacers for lower height.
*Overall height with cylinder remains the same.

Documents Size: Pages:  
Atlas« Apex-10 Manual 1.6 MB 75 downloadView

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.